1) Hardware conflict
Clash of the hardware to do it again? That's mainly because Windows crushed. A hardware device that communicates with the hardware device to another through a kind of channel, called Interrupt request channel (IRQ). And each of these must be unique IRQ. This means that an IRQ will be very different from another IRQ. For example, the printer is connected to the channel is usually IRQ 7, is to connect the keyboard and floppy IRP 1 IRQ 6 channels are connected. Try to create their own channels for these devices unit.The more devices you have, or if you do not have these devices installed inside them properly two or more devices have the same IRQ share. When the user tries to use the device address at the same time, just when the computer crushes.
Conflict is the way to ensure your computer hardware, then Start -> Settings -> Control Panel -> System -> Device manager can be found at any hardware yellow icon next to the '!' At the sitting. The hardware properties can be viewed by clicking on the IRQ number for the device, which is now in use. If this number is twice the number of devices that can be used in two.
This issue will need to:
Go to Device Manager to uninstall the problematic device or devices to be installed again. Drivers may be updated in some time. Without the driver from the following link collection may be tried -
http://download.cnet.com/windows/drivers.
If the device is a sound card or modem, then put them into the open slot on the motherboard can be seen in any other. Will be working inside the computer (ie the computer's hardware to open a) must be switched off.
2) Bad Ram
It is understood from the name of what can be. RAM of the problems caused by the BSOD or blue-screen error messages can come in and "Fatal Exception Error.". Fatal Error shows significant hardware problem. Error means that this is no time, there is a part of the broken and need to be replaced.
But for the RAM that comes Fatal Error may cause memory / RAM, just like the match has not been the mismatch. For example, bus-speed RAM, which must match the speed of the motherboard bus. Fatal Error If you do not come together. For solving this problem, the bus-speed RAM to the motherboard will be put. If you have multiple RAM memory and problem-footed detect it shall be opened. RAM also has a function called Wait State's BIOS, which is going to control. The function will be increased, if necessary, go to BIOS Settings. So hopefully this will get rid of the problem.
3)BIOS settings
Each motherboard has been chief-set settings with the default settings from the factory. This setting computer to access the keyboard at boot time or F2 or Delete button press. Just as we enter the BIOS settings on the control should be extra careful.
A common BIOS error concerns the CAS latency, which is referred to as RAM. Three CAS latency of RAM, and the old in the new SDRAM is two. If for any reason this option if the wrong RAM, or may be locked, the computer's display may be frozen. If possible settings in the BIOS auto-IRQ number with a good idea.
3)Hard disk drives
A month after the hard drive should be a fragment of the information. Screen Freeze caused a lot of it to get rid of the problem. Windows Start -> Programs -> Accessories -> System Tools -> Disk Defragmentation to run at will.
During the defragmenter is better not to work on the PC. When the schedule sets can be saved, when will this process. And for this to be used at the Windows Task Scheduler.
If the data if the hard drive is full, the computer will be slow and would crush. Some free space should be created all the time. Risaikelabina to empty every week. SanDisk will also occasionally. The disk scan to Start -> Programs -> Accessories -> System Tools -> SanDisk will have to run. Or, it might taskasidiulara schedule will be set to the time when the computer is not working
4) Viruses
Such problems may be due to the virus. Boot sector viruses, some of which have entered all the data on the hard disk can be removed. Without the computer will crush. This is a good idea for the 'Windows startup disk' to be made. This would go to Start -> Settings -> Control Panel -> Add / Remove Programs and Start Up Disk. we should update our antivirus regularly.
5) Printers
There is a small memory in printer, called buffer. This buffer can be easily overloaded. If the printer is trying to print a strange character, which he does not know, then you are likely to crush the computer. a lot of time due to the buffer of the printer to the same issue. For this reason you should always keep the printer's buffer is empty, and the printer's plug should be opened for 0 seconds. Power takes off again with the boot to crack cold boot, and gives the default settings, which printa a pure PC-to be able to work again.
6) Software
Another reason for the crush is faulty computer software. To solve this problem as quickly uninstall the software and install the software needed to be better.
The system registry may be damaged due to the old reference, which have been uninstalled. Using the Registry Cleaner to clean the registry. The reference of old software all information will be deleted. It may be broken if the registry will have to install the operating system again.
7) Overheating
CPU cooling fan to cool the CPU, which helps to keep all the time. If the cooling fan fails for any reason, in addition to its work in the heat of the CPU (overheat) will show the type of error is called 'kernel error'. To get rid of this problem can be cleaned off the cooling fans or cooling fan also purchased any key, and put it on the CPU. PC BIOS can be seen at how much CPU is hot.
8) Power supply problems
Power Supply does not work, just like a lot of time. The computer may crush. Buy a Power Supply on any key for this CPU should be used. If the quality is good with a UPS can be used. It will be a clean and pure power supply. Electricity and each can be turned off while the computer is correct.